|
AIR COOLED CABLES
 Air
cooled cables are manufactured by round stranded copper cables with a
diameter of wire 0.1- 0.3 mm. The surface of the wires are normally bare or
on request tinned. Maximum cross section 1,000 sq.mm.
The contact areas are assembled with solderless pressed Copper
connectors.
It is possible to deliver all types with or without insulation. The
material of the standard insulation is PVC but on request other materials
like silicon etc. are possible. Cables in variable lengths and with
different drilling as required, are also manufactured. Current load must be
reduced by 15% while using insulated cables. When placing an order, please
specify the length and if necessary the material of the insulation.
<< Back
HIGHLY FLEXIBLE AIR COOLED COPPER CONNECTORS
 Highly flexible connectors are manufactured by
braided tapes with a single wire diameter of 0.07/0.10 mm bare, tin or
silver coated. Standard flexibles are non insulated but on request it is
possible to deliver the connectors with insulation tubes. Standard lengths
are 300mm and drilling patterns are specified however the designs lengths
and drilling patterns are changeable to suit your fitment. The contact
areas are assembled with solderless pressed copper connectors bare and on
request tin or silver coated.
 The advantage of the solderless pressing
process is that only material of same analysis and same conductivity is
being connected which is not the case if tin or welding which are
additionally used.
Standard manufactured connectors have
a width of 20-200mm. Possible cross - sections are 25 - 6.000 sq.mm or
above.
<< Back
FLEXIBLE CONNECTORS
Manufactured by bare/tinned braided copper tapes with solderless pressed
terminals similar to DIN 46234
<< Back
|
